Features
Extremely high wood-filling of 40%
Real wood feel, look and smell
 
Very easy to print
Warp-free printing and no deformation after cooling
Great thermal stability and filament flowing behaviour
Perfect first- and inter-layer adhesion
Can be printed at high printing speeds
 
Create wood-nerve structures
By postprocessing the printed object with a piece of fine grit sandpaper
By varying with the print/extrusion temperature
 
Biodegradable
 
General printing guidelines
Spool Weight: 0.5kg
Nozzle size: ≥ 0.4mm
Layer height: ≥ 0.2mm
Flow Rate: ± 104%
Print temp: ± 210 - 240° C
Print speed: 低速
Retraction: Yes ± 5mm
Heat bed: ± 0 - 60° C
Fan speed: 50-100%
Experience level: Beginner
 
Nozzle cleaning
When printing with filled/composite filaments it is recommended to clean your nozzle immediately after printing by feeding 15-20cm PLA filament through your nozzle.This will make sure that any potential fillers are flown out of your nozzle.It is even better to use glow in the dark PLA as the extremely hard phosphorous particles are much more likely to scrape out residual waste from your nozzle.