top of page

Bambu Lab has launched a new entry-level 3D printer - A1 Mini, which is the lightest, smallest, most affordable and easiest to use among Bambu Lab's 3D printers!

 Product Features:

  •  Fully automatic calibration: Bambulab A1 mini 3D printer uses an advanced fully automatic calibration system, which eliminates the need for manual adjustment and ensures that every print can achieve the best results.
  •  Multi-color printing: Equipped with AMS lite, multi-color printing becomes simple and reliable, providing colorful printing options for everyone.
  •  Silent mode: The noise level is less than 48 decibels when operating in silent mode, ensuring that it will not disturb your work or living environment.
  •  High speed and precision: The maximum acceleration reaches 10,000 mm/s², ensuring printing speed while maintaining accuracy.
  •  MakerWorld One-Click Printing: With the MakerWorld platform, you can start printing with just one click, which is simple and fast.
  •  Plug-in design: The plug-in design of A1 mini makes replacing consumables quick and easy, improving the convenience of use.
  •  Automatic flow compensation: The machine will automatically adjust the flow rate to ensure a smooth surface in every corner.
  •  Reliability: Bambulab’s quality is trustworthy, and the reliability of the A1 mini 3D printer can meet your long-term use needs.
  •  Easy setup: The A1 mini comes pre-installed, pre-calibrated, and pre-adjusted, allowing you to set up your first print in about 20 minutes.
  •  Automatic carrier tape calibration: A1 mini can automatically check the carrier tape tension through vibration frequency calibration. If the carrier tape is too loose, the system will prompt you to use the automatic carrier tape tensioner to adjust it.

 Technical Specifications:

  •  Body: A1 Mini
  •  Technology: Melt Deposition Molding
  •  Print size (length x width x height): 180 x 180 x 180 mm
  •  Hot end: All metal
  •  Extruder teeth: Steel
  •  Nozzle: Stainless steel
  •  Hot end maximum temperature: 300℃
  •  Nozzle diameter (default): 0.4mm
  •  Nozzle diameter (optional): 0.2mm, 0.6mm, 0.8mm
  •  Tool head cutter: built-in
  •  Wire diameter: 1.75 mm
  •  Compatible Print Board Surfaces: Bambu Textured PEI Panel, Bambu Smooth PEI Panel Print Board
  •  Maximum temperature: 80℃
  •  Tool head maximum speed: 500 mm/s
  •  Tool head maximum acceleration: 10 m/s²
  •  Maximum hot end flow rate: 28 mm/s @ABS (Model: 150 × 150 mm single wall material: Bambu ABS; Temperature: 280°C)
  •  Component cooling fan: Closed loop control
  •  Hot end fan: Closed loop control
  •  MC board cooling fan: closed loop control
  •  PLA, PETG, TPU, PVA: Ideal
  •  ABS, ASA, PC, PA, PET, Carbon/ Glass Fiber Reinforced Polymer: Not recommended
  •  Surveillance camera: Low-speed camera (up to 1080P) Supports time-lapse photography
  •  Material break detection: support
  •  Fiber measurement: Support
  •  Power off and resume printing: Support
  •  Cable winding sensor: Support
  •  Dimensions: 347 x 315 x 365 mm
  •  Net weight: 5.5 kg
  •  Voltage: 100-240VAC, 50/60Hz
  •  Maximum power: 150W
  •  Display: 2.4 inches 320 x 240 IPS touch screen
  •  Connection: Wi-Fi, Bambu-Bus
  •  Capacity: Micro SD Card
  •  Operation interface: touch screen, mobile APP, computer application
  •  Motion controller: Dual-core Cortex-M4 processor
  •  Slicing Software: Other third-party slicers that can export standard G-code are supported, such as Superslicer, Prusaslicer, and Cura, but some smart features may not be supported.
  •  The slicing software supports operating systems: MacOS, Windows
  •  Wi-Fi frequency range: 2412 MHz - 2472 MHz (CE), 2412 MHz - 2462 MHz (FCC), 2400 MHz - 2483.5 MHz (SRRC)
  •  Transmitter power (EIRP): ≤ 21.5 dBm (FCC), ≤ 20 dBm (CE/ SRRC)
  •  Program: IEEE 802.11 b/g/n

Bambu Lab A1 Mini 3D Printer

  • A1 Mini: A1 Mini 3D Printer x 1

    A1 Mini Combo: A1 Mini 3D Printer x 1 + AMS Lite x 1 

Related Products