ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
ReForm comes in several materials - namely rPLA, rPET, and rTitan – which are based on exactly the same uniquenformulations as respectively our EasyFil PLA, HDglass and
filament ranges, but are made out of residual extrusion waste streams which are re-compounded and homogenized into high-end filaments with significantly less environmental impact.
With our ReForm initiative we aim to reduce waste streams, make 3D printing more sustainable, and make upcycled/recycled filament significantly more affordable.
Unique features
- 100% upcycled/recycled filament with retaining the unsurpassed printing properties
- EasyFil PLA/HDglass/TitanX propertiesLess environmental impact by quality controlling and re-using extrusion waste streams
rTitan:
- FDM/FFF-optimizedWarp-free printing
Optimized filament flowing behaviour and inter-layer adhesion
Excellent adhesion to heated glass plate, Kapton tape, PET tape and Formfutura EasyPad - Compliant to FDA food and drink contact articles
- Greatly improved mechanical properties, strength, and impact resistance
Formfutura 1.75mm ReForm™ rTitan
Nozzle size: ≥ 0.15mm
Print Temperature: ± 240 - 265° C
Heat Bed Temperature: ± 80 - 90° C
Layer height: ≥ 0.1mm
Print speed: Medium
Fan speed: 0-30%
Flow Rate: ± 106%
Retraction: Yes ± 5mm
3D Printing Experience: Beginner / Intermediate
Net Weight: 1kg
The information shown above is for reference only to find the best print settings. These setting ranges should be suitable for most printers, but depending on the printer, you may want to test outside these ranges. Since printers on the market are different, it is impossible to provide a setting suitable for all occasions.
