
Free Nomad Sculpt Beginner Guide: Model Chiikawa Step by Step
Updated: Oct 9
To make Chiikawa in Nomad Sculpt, break the character down into a head, body, ears and limbs, then shape them from spheres. This free beginner guide takes you through preparing a reference image, building the basic forms, adding facial features and colour, and saving your work. It also explains how to take the model towards 3D printing.
This guide is free to read and follow. You will need to obtain the Nomad Sculpt app separately; its cost is separate from this tutorial. Start by making a digital Chiikawa that you can view from every angle, then decide whether to turn it into a physical figure.
What do you need before you start?
An iPad or Android tablet with Nomad Sculpt installed.
A Chiikawa reference image that clearly shows the head-to-body proportions, ears and facial features.
A stylus makes fine details easier to control, although you can use your fingers for the initial shaping.
You can complete the digital model without a printer. To make a physical figure, you will also need a computer, slicing software, a 3D printer and printing material. For finishing, prepare sandpaper, suitable glue, acrylic paint, brushes and a palette as needed.
Get to know these Nomad Sculpt tools
First, learn the difference between moving a whole part and pulling its surface. This makes the tools easier to understand.
Scene: add spheres, select objects, and name and organise parts such as the head and body.
Gizmo: move, rotate and scale a whole object, for example by flattening a sphere into an oval head.
Move: pull the surface within the brush area to adjust the cheeks and body outline.
Smooth: soften surface bumps. Use it sparingly to preserve the shape you want.
Symmetry: mirror sculpting strokes across a symmetry plane.
Paint: add colour to the model's surface.
You can look up the tool names in the official Nomad Sculpt tool manual. The exercise below introduces them as you go.
Step 1: Study Chiikawa and start a new project

Step 1 diagram: study the front and side references, then create a project, add the reference image and save. Panels 1–3 show the sequence.
Study the reference image and note how much larger the head is than the body, how far the eyes sit from the centre line, and where the ears meet the top of the head. Leave the tiny mouth lines until later; the head-to-body proportions have a bigger effect on the character's likeness.
Create a new project in the Files menu and save it as “Chiikawa-01”. Under Background, use Reference Image to add your reference, then adjust its size and position so it sits beside your work. See the official background and reference image guide for this setting.
Rotate the view to explore the scene, then return to the front. As you finish each part, check its proportions from the front and its thickness from the side. This helps the model look right from more than one angle.
Step 2: Build the head and body from spheres

Step 2 diagram: start with a large and a small sphere. Use Gizmo to widen the head and shorten the body, then position them with a slight overlap at the join.
In Scene, open Add and choose Sphere for the head. Use Gizmo to adjust its width, height and depth into a rounded shape close to your reference. After adding a primitive, finish adjusting its parameters, then press Validate to turn it into a sculptable mesh. The official scene manual explains this process.
Add a smaller sphere for the body and move it below the head, with the two shapes slightly overlapping. Keep them as separate objects for now and name them “Head” and “Body” so you can adjust their proportions easily later.
Zoom out and check the overall shape. Is the head prominent enough? Is the body too long? Does the head meet the body sensibly from the side? Resolve these points before adding detail.
Step 3: Refine the outline with Move and Smooth

Step 3 diagram: the symmetry plane passes through the centre of the head. Move pulls the outline, while Smooth gently softens local surface bumps.
Select the head, turn on left–right symmetry, and check that the symmetry plane passes through the centre of the face. Use a fairly large Move brush to gently pull out the cheeks and lower outline. For broad changes, several small drags are easier to control than one long pull.
If small bumps appear, lower the Smooth strength and lightly brush the area that needs tidying. If the cheeks lose their shape, undo the stroke straight away, then reduce the brush size or strength.
If symmetry is misaligned, check the object's position and the Local/World symmetry mode. Transform tools such as Gizmo have their own symmetry settings, so check these as well as the sculpting brush switch. Refer to the official symmetry guide.
Step 4: Add the ears, arms, feet and tail

Step 4 diagram: add the ears, arms, feet and tail, then check from the side that each part overlaps the main form. The green tick shows contact; the red cross shows a floating part.
Make one ear from a small sphere. Use Gizmo to stretch, scale and rotate it into position, then duplicate it for the other side. Start the arms and feet from small spheres too: set their size and position first, then refine them with Move. Place the tail at the back of the body using your reference.
After adding each part, turn to the side or back and check that it overlaps the head or body rather than floating nearby. Keep the objects separate for now so you can lower an ear or shrink an arm whenever needed.
To try a different pose, save another copy once the basic shape is complete, then change the angle of one arm. Turn off symmetry for that part at this stage and keep the original version for comparison.
Step 5: Finish the face and add digital colour

Step 5 diagram: adjust the eyes' position and thickness, then add the mouth, eyebrows and blush. Zoom out to check the overall expression.
Return to the front view and position the eyes first. Make them from two small spheres, flatten and shrink them with Gizmo, and place them on the face. Check their depth from the side so the whole eye does not float outside the face.
For your first attempt, use Paint to draw the mouth, eyebrows and blush, concentrating on the expression. To try a sculpted mouth, lightly draw the lines with Crease, then tidy the surrounding surface with low-strength Smooth.
If details look jagged, check the mesh density of that part. Use Subdivide gradually as needed, then try painting or sculpting again. After each increase, check that the app still responds smoothly; you do not need to subdivide every part heavily at the start. See the official painting guide for how surface colour works.
Add a base colour to the head, body and limbs, then work on the eyes and blush. Digital colour helps you preview a colour scheme. With ordinary single-colour 3D printing, the physical figure's colour still depends on the printing material and any painting afterwards.
Step 6: Save the model and record your finished work

Step 6 diagram: save an editable Nomad project first, then export separate PNG images of the front, side and back.
Save the Nomad project when you finish so you retain an editable version. Save it separately as “Chiikawa-02-finished” to keep it apart from the early practice file.
Use the Render section in Files to export images of the front, side and back. If your goal is digital sculpting, you now have work you can show. See the official files manual for saving, image output and model export options.
Review three things: do the head-to-body proportions match your reference, do the facial features convey the expression you want, and are the back and joins tidy too? Choose one point to improve and compare the result with the earlier version. This gives you a clearer direction than continually adding detail.
Next step: turn your Chiikawa model into a physical figure
Decide whether to print in one piece or separate parts
Printing in one piece is a useful way to practise the complete process. Keep the original project and save a separate printing version. Check that the ears, arms and feet overlap the main form sufficiently.
Join organises several objects into one object; it does not automatically create a continuous surface at the joins. To fuse the forms, select the relevant parts in a backup version and use a Boolean union or Voxel Merge. Voxel Merge resolution affects how much detail survives, so check the face and seams again afterwards. See the official guide to merging parts for the differences.
For printing in separate parts, plan the joins early and design locating pegs and sockets. Allow fitting clearance in the sockets and test a small sample before printing the whole model. Beginners can complete a one-piece version first, then try separate parts.
Export STL or OBJ and check the slicing preview
In Files, use Export to choose STL or OBJ. Check that the export includes all the parts you need, whether you are exporting all objects, visible objects or selected objects. Import the file into your slicer, set the physical size, and check:
Whether the ears, limbs or facial features are too thin and might disappear when scaled down.
Whether overhangs need supports and the model's print orientation is suitable.
Whether the base rests securely on the build plate, and whether the slicing preview shows missing layers or disconnected islands.
Whether joints between separate parts retain the clearance you tested.
After printing, test-fit any separate parts, then sand, paint and glue them as the material and shape require. For more on printing and finishing, read our 3D Printing Guides & Fixes articles.
Optional challenge: add micro:bit interaction
The original “Singing Chiikawa” project also included sound or light interaction as an extension. To try this, prepare a micro:bit V2, a data-capable USB cable and a battery pack. Test button-triggered sounds or LED displays outside the model first, then plan space in the base using the actual dimensions of the board and battery pack.
Get the circuit and programme working before designing an accessible, removable mounting arrangement. Keep the USB port and battery pack easy to reach. You can complete the digital sculpting exercise on its own and leave the interactive device for a later stage.
Would you like an instructor to guide your Nomad Sculpt practice?
After making your first Chiikawa with this guide, explore Beets' Nomad Sculpt Comprehensive Training Course if you would like more structured practice in sculpting, mesh preparation and exporting separate parts. Bring your practice model and the steps you found difficult to help identify what to improve next.




Comments